It is necessary to put the electrical box of the shrinking machine in a ventilated place to prevent it from working in dust and corrosive gas; it is not allowed to add or change the input and output of the PC without permission.
When exchanging the power supply of the machine tool, it is necessary to recognize the motor steering from the beginning; the machine tool should be kept clean, and in particular, there should be no foreign objects in the sliding grooves such as the clamping block and the slider.
Add lubricating oil to the chain and other sliding parts regularly, and adjust the pressure: adjust the pressure with an electromagnetic overflow valve to ensure that the system pressure reaches the required operating pressure; it is necessary to disconnect the power supply during cleaning and maintenance.
Preparation before driving: check whether the oil level of the fuel tank reaches the oil level line, refuel at each smooth point, open and reduce the machine to recognize the motor steering, check for abnormal sound of the oil pump, check the hydraulic system for oil leakage after startup (angle encoder is not Refueling is allowed) Mold adjustment: the mold device needs the middle of the mold and the clamping block, and the clamping block can be adjusted with bolts; the auxiliary block is in the middle of the mold, and the auxiliary block is adjustable; Frame bolts, tighten the bolts after adjusting the center.