Dongguan FangRong Precision Machine Industry Co., Ltd.

Precision machinery manufacturing experts

24 HOUR SERVICE HOTLINE

0086-18928225031

E-mail:frmachinery@gmail.com

You are here: > Home > product > Drawing Machine

Drawing machine FR-76

Metal Pipe Drawing Machine is reducing diameter 

of metal (aluminum,stainless steel,copper and iron)

 on tube and pipe by drawing strength of the car and dies.


Order Hotline:0769-8320 2640

Bronze Pipe Drawing Bench reduce diameter and thickness of metal on tube and pipe by drawing strength of drawing trolley and drawing dies,including aluminium,steel,iron, brass and bronze.


Bronze Pipe Drawing Bench can pull the round,hexagonal and other shaped material,which is the professional equipment for drawing tube and pipe.it also can be optional for automatic feeding device, automatic cutting, automatic blanking, drawing quantity can be one to four per time.

 

Bronze Pipe Drawing Bench with a internal mandrel to reduceing the diameter and thickness of tube and pipe.The inner diameter (ID) is determined by the inner and outer diameter of the stock tube, the outer diameter of the final product, the length of the die landing, the amount of back tension, and the friction between the tube and the die. This type of drawing operation is the most economical.


Advantage

1. Taiwan technique, Taiwan chain, Taiwan HIWIN linear guide.

2. Automatic feeding system and receiving system.

4. Can drawing one tube or multi tubes.

3. Not hurt tube's surface, stable and accurate.

5.good after sale service

 feature:


    Metal Pipe Drawing Machine is reducing diameter of metal (aluminum,stainless steel,copper and iron) on tube and pipe by drawing strength of the car and dies.


  Without internal diameter control, it can be optional for automatic feeding device, automatic cutting, automatic blanking, drawing quantity can be one to four per time.


  It's called Tube sinking, also known as free tube drawing, reduces the diameter of the tube without a mandrel inside the tube. The inner diameter (ID) is determined by the inner and outer diameter of the stock tube, the outer diameter of the final product, the length of the die landing, the amount of back tension, and the friction between the tube and the die.This type of drawing operation is the most economical.