Taiwan thread rolling machine has been at the forefront of the development of thread rolling machine, today we use our knowledge to tell you in detail about the structure and performance of Taiwan hydraulic thread rolling machine

The three main shafts of the machine are synchronized and rotate in the same direction. The movable main shaft is moved horizontally by hydraulic pressure. The rolling wheel rolls the workpiece to make it into the required thread and other shapes. This machine is mainly composed of organism, rotating box, fixed spindle seat, movable spindle seat, hydraulic system and electrical parts. The fixed spindle base and the movable spindle base are mainly used for installing the thread rolling wheel and the tooth position adjustment of the thread rolling wheel. The center distance of the main shaft of this machine is adjusted to the center of the main shaft seat, that is, the workpiece is in the center of the machine when it is rolled, and it is more convenient for rolling the long workpiece and passing through the machine. The angle between the spindle axis and the table can be adjusted within ± 3 °, and the axial feed per rotation of the workpiece during rolling can be determined according to the parameters of the workpiece and the mechanical properties of the workpiece material. The hydraulic system is the feed power of the machine, which mainly makes the movable spindle seat feed and retract.

1. The transmission system of the machine

The transmission part of this machine is driven by a main motor through a V-belt. After changing the power through a gearbox, three output shafts with the same direction and synchronous operation drive three universal drive shafts to transmit power to the three main shafts.

2. The hydraulic system of the machine

There are four processes in the hydraulic feed motion: feeding → rolling → retreating → stopping

The four processes are controlled by time relays or manually. Two working cycle modes, manual and automatic cycle, can be realized. When the working environment temperature is 14-38 ℃, the recommended viscosity of the hydraulic system is 18-27cst (50 ℃) or less, the hydraulic system 68 # anti-wear hydraulic oil is recommended, and the oil pool capacity is 60 kg. When the ambient temperature is too high or the working conditions are poor, the oil temperature is too high, the user can prepare a cooler